Working voltage: DC5V Working current: less than 15mA when at rest, less than 250mA when working Operation mode: infrared remote control Working mode: up to 11 working modes Drive motor: DC 5V 4-phase 5-wire stepper motor 28BYJ48 Product use: DIY screen slider, DIY various small tooling<br><br>The main function: Multiple working modes are available Mode 1: After a forward rotation, a random delay of 3 to 15 seconds is followed by a reverse rotation, a random delay of 3 to 15 seconds, and an infinite loop. Mode 2: After a forward rotation, a random delay of 10 to 30 seconds is followed by a reverse rotation, a random delay of 10 to 30 seconds, and an infinite loop. Mode 3: After one forward rotation, there will be a random delay of 3 to 15 seconds, an infinite loop. Mode 4: After one forward rotation, there will be a random delay of 10 to 30 seconds, an infinite loop. Mode 5: After one forward rotation, there will be a random delay of 30 to 50 seconds, an infinite loop. Mode 6: After one forward rotation, there will be a random delay of 50 to 99 seconds, an infinite loop. mode 7: switch the current mode to forward rotation Mode 8: Switch the current mode to reverse Mode 9: forward rotation all the time, no delay time Mode 10: Numbers 1-9, delay 1-9 seconds after the logo rotates once, infinite loop Mode 11: 5 forward rotations, 1 reverse rotation, random delay of 5-12 seconds, infinite loop Colour:As Shown Material:Plastic<br><br>Package Contents: 1 * ULN2003 driver board<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.