CR3001 EOBD OBD2 OBDII 1.77 inch Screen Car Code Reader Diagnostic Tool Engine Error Scanner •CReader 3001 provides full OBDII/EOBD diagnostic functions and complies with protocols such as ISO9141-2,ISO14230-4,SAEJ1850 and ISO15765-4. •Supports full OBD2 functions,motor check that includes: •Code reading: Display the detailed description of the Diagnostic Trouble Code (DTCs) •Clear codes and reset: Turn off the engine light (MIL),clear the codes and reset the monitors. •Data flow: Read and display a live data stream from ECG/PCM,graph the functions graphically and store the freeze frame data. •I/M readiness status: Shows whether the various systems related to vehicle emissions are functioning properly and are ready for inspection and maintenance testing. •Read live data transmission: Displays the continuous data flow information of a vehicle on the live graphic display (waveform). •See freezing frame data: Verify the conditions of the vehicle registered by the on-board computer at the time the emission related fault occurs. •O2 Test sensor: Allows the recovery and display of the test results of the O2 sensor monitor for the most recent tests performed from the vehicle's integrated computer. •On-board Monitor Test: Withdraws and displays the test results of the components and systems of the electric chain related to emissions. •Read vehicle information: Display information such as vehicle identification number,CID (calibration ID) and CVN (calibration verification number),etc. •Test component: Certain vehicle components can be operated by commands sent from the scanner to test its operation •Specifications: •Display: 1.77-inch TFT 160 * 128 dpi screen •Voltage range: 9-18V •Size: 118* 68* 22.3 mm (4.65* 2.68* 0.88 inches) •1 x CR3001 Version Package included: •1 x CR3001 OBDII Auto Code Reader •1 x English User Manual