[Operating Steps] Method 1: This ferrule puller for disassembling sleeve only - Place the sleeve between the red notched end of the tool (notch clamps the sleeve). Method 2: Remove the compression nut and sleeve - Place the red notched end of the compression sleeve puller behind the compression nut. Ensure the compression sleeve puller aligns correctly with the pipe, then rotate the handle approximately 10-15 turns to remove the nut and sleeve. [Save Time] This compression sleeve puller tool is easy to use in relatively tight spaces and restores previously crimped copper pipes to a perfect circular shape. It won't damage the copper material. Making the removal of sleeves easy, it simplifies pipe work. [Wear-Resistant] Even if existing valves are severely corroded or freeze, you can rotate the lever to remove the old compression sleeve from the pipe. Ensure the compression ring removal tool aligns correctly with the pipe,then rotate the compression fitting removal tool handle approximately 10-15 turns to remove the nut and sleeve. Easily and quickly address the issue of compression valves failing due to minor leaks. [No Damage to Walls, Copper] This compression ring puller tool can remove leaking compression sleeves without damaging walls, allowing for easy removal of nuts and sleeves from the pipes. The ferrule removal tool is designed to dismantle 1/2-inch copper water compression sleeves.<br><br>Please note:the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! Colour:Red Material:Metal<br><br>Package Contents: 1 * compression ring puller tool<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.