HIGH EFFICIENCY: The end is machined with a full radius to prevent damage to the top of the piston. Very easy to use and very handy when doing your own saw or any other 2-stroke job. CLUTCH REMOVAL TOOL: This is a general purpose piston stopper that requires that the crankshaft is held in place. SCOPE OF APPLICATION: Can be used to hold the clutch or remove the flywheel nut, or to repair power brushes and fan blowers. leaves. EASY TO REMOVE: Simply remove the spark plug, screw in the tool and gently tighten. Remove the spark plug, screw the tool in place and press it lightly. EASY TO USE: Rotate the engine clockwise or counterclockwise until it appears that the piston is conflict with the tool and is ready to be repaired. Note that most chainsaws have left-hand threads on the clutch side. Set di utensili per la rimozione della frizione This is a piston retainer for servicing and the crankshaft must be secured in place. It can be used for clutch servicing or flywheel nut removal or weeder and leaf blower servicing . 02 Simply remove the spark plug and clamp the tool in place, then gently tighten. The end is machined to a full radius to prevent damage to the top of the piston. If you do the cutting or other 2-cycle work yourself, it is very easy to use and very convenient to carry. Color: orange + black Package weight: about 308 grams Package includes: 1 * set of clutch removal tools 03 Tools for removing chainsaw clutch We provide clear pictures and take measurements where possible. Check as much as possible to make sure the item is what you need. Due to manual measurement, please allow 0.5-1 inch difference. (1 inch = 2.54 cm) There are no instructions in this kit. Professional installation is highly recommended! Run the motor clockwise or counterclockwise until you feel the piston rest on the tool and you're ready to repair. Keep in mind that most chainsaws have left-hand threads on the clutch side.