Feature:1. CC debugger is a small programmer and debugger for TI low power RF system chips.2. Can also be used to control selected devices of for SmartRF Studio, very convenient.3. Can be used with for IAR Embedded Workbench for 8051 (7.51A or higher) for debugging and for SmartRF Flash Programmer for flash memory programming.4. You can match it with hardware to realize analyser function, and the sniffer board with shell is waterproof and anti static.5. Can program and simulate a variety of chips, including CC1110, CC1111, CC2430, CC2431, CC2510, CC2511, CC2530, etc.Specification:Item Type: CC DebuggerMaterial: ABS + Printed Circuit BoardFunction: Used for TI low power RF system chip. Working Frequency: 2.405-2.485GHzWireless Transmission Rate: 250KbaudPower Consumption: <20mA (receiving); <25mA (transmitting)The Chips that the Programmer Can Program and Simulate are: CC1110, CC1111, CC2430, CC2431, CC2510, CC2511, CC2530, CC2531, CC2533, CC2540, CC2541, CC2543, CC2544, CC2545The Same Device can be Controlled from for SmartRF Studio. Can Control the Following Transceivers from for SmartRF Studio: CC1120, CC1121, CC1125, CC1175, CC1100, CC1101, CC110L, CC113L, CC115L, CC2500, CC2520Can Also be Used to Program for PurePath Wireless Devices: CC8520, CC8521, CC8530, CC8531Working: Can work with 7.51A or higher version of for IAR EW8051..Package List:1 x CC Debugger1 x Sniffer Board1 x Antenna3 x Programming Line1 x Adapter Board1 x USB CableNote:Do not place the product in an environment that is too corrosive, humid and high temperature.