TCS PRO+ is a fast and reliable diagnostic tool, between vehicle and computer. It works with both new and old vehicles. With CARS you can perform -specific diagnostics for cars and light trucks from 1988 onwards. There are 47 different in total. With the TRUCKS package you can perform -specific diagnostics for light and heavy commercial vehicles, buses and trailers from 1995 onwards. There are 37 different in total. The diagnostic program GENERIC is designed for regulation-based diagnostics specifically for emission-related fault codes. GENERIC is included in and TRUCKS packages. Multiplexer functions, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, Analog Input, 5V Output).<br><br>In the sequence, we do the following: 1) Read and erase fault codes; 2) Read live data; 3) Basic settings; 4) Scan functions; 5) Full compliance with eOBD/OBDII standards. Functions: 1. Make Specific Continuous Diagnostics; 2. Scan Function; 3. EOBD/OBDII Communication; 4. Serial System; 5. Engine; 6. Ignition; 7. ABS; 8. Service Reset; 9. SRS; 10. Immobilizer; 11. Instruments; 12. , etc. Voltage Check: When TCS PRO+ is connected to the vehicle, the unit check the battery voltage of the vehicle and automatically adjust to the vehicle's voltage level of 12 or 24 volts. If the voltage is too high or too low, TCS PRO+ warn you with sound and light and also remind you with the battery in our diagnostic software. Colour:As Shown Material:ABS<br><br>Package Contents: 1set * Car Truck Diagnostic Tool<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.