Product function: after the measurement data of the four-wheel aligner is determined, for example, the camber angle measured by the aligner is greater than the specified value by minus 1 degree. At this time, you need to remove the positioning fixture, remove the tire and replace the required four-wheel alignment parts. At this time, you need the magnetic leveling instrument produced by us. In the past, operators used their own experience to operate when adjusting the inclination, and sometimes there were errors. Using the level produced by us, they can accurately adjust to the required measurement angle. standard:all-new Measure the camber and caster on the wheel hub or brake disc It is suitable for accurately checking caster and camber Simple leveling adjustment from - 5 degrees to 5 degrees The magnetometer is mounted on the wheel hub or disc brake Adjustment is allowed to maintain correct wheel alignment and even tire wear Allows you to restore the strut to its original camber position after removal and reassembly Before reinstallation, check the change of suspension or camber angle Easy to read and operate Save time and money instructions: 1. Remove the four-wheel alignment sensor (fixture) and tire; 2. Carefully suck the magnetic level on the side of the brake disc; 3. Adjust the level to zero; 4. Install the required positioning parts; 5. Use tools to adjust the positioning parts to the required measurement angle with the help of the degree indication of the magnetic level. 6. Re measure with the locator. If there is a little deviation, just fine tune it under the vehicle. (generally, a little deviation will not cause positioning failure) Size: 15.5*8*6cm Weight: 290g Color: Silver Material: level aluminum material Quantity: 1pcs Package package: 1 car four-wheel alignment level