Feature:1. Applicable Model: The camera cage is original model that is designed for RP camera that fits perfectly and has good performance.2. Anti Skid Gasket: The bottom is equipped with anti skid gasket to prevent scratching; 1/4in screw hole and for Arca bayonet design can be compatible with tripod and other equipment.3. Strong Expansion Performance: Camera shoulder strap port and wrist strap port are designed. Multiple screw holes and for Arri positioning holes around the camera can be expanded to install upper handle and other equipment. The cold boot interface can be installed with microphone, monitor, fill light, etc.4. Hollow Design: The porous hollow design around minimizes the weight of the cage, thus reducing the physical energy consumption without affecting the use of keys, battery replacement, and data cable plugging.5. Aluminum Alloy: The cage is made of aluminum alloy, CNC accurate machining, manual polishing, anodized surface treatment, with strong durability, stability and safety, and the bearing capacity is higher than the required bearing capacity, which can avoid accidental falling to damage the camera.Specification:Item Type: Camera CageMaterial: Aluminum alloyGross Weight: 246g/8.7ozInterface: Cold shoe interface, 1/4in screw hole, 3/8in screw hole, 1/4in screw, for Arri locating hole, for Arca bayonetApplicable Model: For RP camera.Package List:1 xCamera Cage4 x Hex Wrench1 x Round Flat Spanner (Installed)