BW16-Kit is a development board designed for the BW16 module. BW16 is a dual-frequency Wi-Fi + Bluetooth SoC module developed by B&T based on RTL8720DN chip. BW16 supports dual-frequency (2.4GHz or 5GHz) WLAN and low-power Bluetooth 5.0, integrates ARM V8 (compatible with for Cortex-M4F) high-performance MCU, ARM V8M (compatible with for Cortex-M0) low-power MCU, WLAN (802.11 a/B/g/ n), MAC, Bluetooth baseband and RF baseband, and provides a set of configurable GPlO ports for the control of different peripheral devices. Supports for 802.11a/B/g/n,2.4GHz or 5GHz. Support for HT20 and HT40 mode. Supports for low-power Beacon listening mode, low-power receiver mode, and low-power suspension mode. Built-in AES /DES / SHA hardware engine. Supports for TrustZone-M and secure startup. Support for SWD to debug port access protection and disable mode. BLE 5.0 is supported. Bluetooth supports high power mode (7dBm, sharing the same PA with Wi-Fi). Wi-Fi and Bluetooth share the same antenna. Supports for the STAAP/STA + AP operation mode. Simple Config (apps) that support for Android and for IOS Wi-Fi one-click Network allocation. Supports for Bluetooth-assisted network distribution. Supports for local serial port upgrades and remote firmware upgrades (FOTA). Supports for secondary development and programming in Linux and Window environments. Supports for Arduino development. Colour:Black Material:PCB+Plastic+Metal Package Contents: 1 x BW16-kit Development Board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.