Brush Generator Voltage Regulator AVR 1 Phase Motor Automatic Regulator 170255V KIDAVR95S Feature: 1. Short circuit protection and PID regulation: short circuit protection and PID regulation, automatic shutdown to protect electrical equipment2. Overcurrent, overvoltage, overload protection: have the properties of overcurrent protection, overvoltage protection, overload protection etc.3. For KAMA, for Kipor: automatic voltage regulator is applicable to KAMA, for Kipor single-phase diesel engine generators4. For 8.5/9.5KW Single Phase Generator: Suitable for 8.5/9.5KW Single Phase Generator, voltage adjustable from 170 deg; 255V5. Scratch resistance: AVR adopts ABS material, has impact resistance, scratch resistance, environmentally friendly Specification: Item type: Brush generator voltage regulator Material: ABS Auxiliary winding voltage: 75VAC Sampling winding voltage: 105VAC Adjustable voltage range: 170-255V Starting voltage: 5VAC Adjustment accuracy pressure: 5 (motor speed varies within 4%) Intended use: suitable for 8.5/9.5KW single-phase generator Package list: 1 x Brush generator voltage regulator How to use: 1. Unit rated voltage adjustment: Slowly adjust the potentiometer AVR to make the generator output voltage reach the rated value. The voltage reaches the rated value (CW rise, CCW fall) 2. Adjust the low frequency protection point: When the frequency reaches the frequency protection point, the generator will be turned off for protection. 3. AVR output stability adjustment: When "VOLT" is adjusted to the rated voltage, the generator voltage may show unstable oscillation at this time. When "VOLT" is adjusted to the rated voltage, the generator voltage may oscillate unsteadily. Adjust the CW "STAB" to reduce the oscillation until it stabilizes. However, over adjustment you can set "STAB" CW to reduce the swing until it stabilizes.