Automation Delay Timer Control Module with Digital Display for 110V-220V Applications

Specifications:  Timing range: 0-999s 0-999m 0-999h.  Supply voltage: AC110V-220V.  Relay: 20A.  Working current: 10A(max).  Power: 500W(max).  Size: 79*26*43mm.  Hole size: 72*40mm.     Instructions:  Please pay attention for your first use. You need wait 6s after your setting data, the module will save the date you have set after 6s.   Short press button SET: If you start the time setting mode , Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button-. Please wait 5s after your setting date, the module will save the date you have set after 5s.  Long press button SET: if you start the parameter setting mode. There are two group parameter for your choice  : P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1,you could set the timing mode by the button+ and button-.  P0--0: Timing time mode: 0---999s.  P0--1: Timing time mode: 0---999min.  P0--2: Timing time mode: 0---999h.  P1--0: The relay will connect after you delay the T1 time.  P1--1: The relay will disconnect after you delay the T1 time.  P1--2: The relay will connect after you delay the T1 time first, Then the relay will disconnect after you delay the T2 time, it finish.  P1--3: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time, it finish.  P1--4: The relay will connect after you delay the T1 time  first, Then the relay will disconnect after you delay the T2 time, it is cyclic.  P1--5: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time, it cyclic.     Example: A customer needs 10 seconds to start up and 20 seconds off. Setup is as follows:  T1 set time 10, T2 set time 20.  P0 -- 0 (T1 time range is seconds).  P1--5 (timer work mode).     Package Included:  1 x Digital Display Time Relay