Suitable for ostrich controller, model airplane wireless remote control and analog voltage control. Alloy gear high power motor high torque output. Aluminum alloy gearbox body is ultra-. Easy to install and . Application range: Heavy-duty motion control of arm joints and leg joints of large robots. Industrial automation production line manipulator control. Precise control of valve angle. Large camera pan/tilt remote control. Various occasions requiring large torque angle control. Rated voltage: 12V~24V/DC (11V/MIN~30V/MAX, limit voltage) No-load current: 500mA (current limit: 5A, it is recommended to use a switching power supply or battery 5A) Maximum torque: 380kg.cm (24V) (actual measurement, not theoretically calculated value) 3648N.cm(24V) (actual measurement, not theoretically calculated value) 190kg.cm(12V) (actual measurement, not theoretical calculation value) 1824N.cm(12V) (actual measurement, not theoretically calculated value) Limit angle: +/- 150 degree or 0 degree~300 degree(MAX) The steering gear has electronic limit adjustment RC mode: 1ms pulse mode: 1ms~2ms (pulse width)/50Hz (frequency) is suitable for wireless remote control. 2ms pulse mode: 0.5ms~2.5ms (pulse width)/50Hz (frequency) is suitable for multi-channel servo controller control. Analog voltage mode: 0V-5V input voltage (0.22V corresponds to 0 degree, 4.78V corresponds to 300 degree) Mechanical life: more than 1,000000 cycles/full load (conservative value) Limit parameters: Limit voltage: 11V-30V/DC (MAX Current limit value: 5A +/- 0.2A(MAX) Working angle: +/- 150 degree or 0 degree~300 degree(MAX) RC mode: 1ms pulse mode: 1ms~2ms (pulse width)/50Hz~333Hz (frequency). 2ms pulse mode: 0.5ms~2.5ms (pulse width)/50Hz~333Hz (frequency). Analog voltage mode: 0V-5V input voltage 0.22V corresponds to 0 degree, 4.78V corresponds to 300 degree) Colour: red Material: PCB+metal Size: 95x60x110mm Package Contents: 1 * ASME-04B Servo Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.