Features Rotation Output: 14-bit rotary position sensor digital angle (interface) and pulse width modulation output, 360° full rotation output based on non-contact magnetic sensor technology. SPI/I2C Interface: AS5048 provides PWM output and SPI or I2C interface to provide absolute angle measurement for microcontroller. There is no need to consider the exact match of the initial zero position of the chip to the magnetic poles used in the mechanical design. High Working Tolerance: The magnetic encoder has a very high working tolerance, including the center position deviation of the chip and the mating magnet, the air gap deviation between the chip and the mating magnet, and the temperature change from -40°C to +150°C. High Resolution: The 14-bit measurement analog front end provides measurement resolution as low as 0.0219 degrees. Linearization and averaging are performed by a single-chip microcomputer, which can realize angle measurement with an accuracy of 0.05 degrees. Good Performance: AS5048A magnetic encoder is made of high-quality plastic material, durable, corrosion-resistant, good working performance and long service life. Specification: Item Type: AS5048A Magnetic Encoder Material: Plastic Product Details: Command 1. No programming required 2.14 full range resolution is 0.0219°/LSB 3. After system linearization, 0.05°precision angle° Field Input Range: 30MT- 70mT In the temperature range of 40°C to +150°C Instruction: PTZ encoder/encoder motor dedicated as5048a is a 14-bit rotary position sensor (previously called encoder) for absolute angle measurement and PWM (= Pulse Width Modulation) full rotation output at 360° based on non-contact magnetic sensor technology. The device is suitable for shaft applications with a simple two-pole magnet turning the sensor IC above or below and the zero position can be programmed into the device with simple SPI commands. The absolute magnetic angular position resolution is 14 bits = 16384 position measurement, serial interface (SPI) with digital value per revolution. AS5048 provides PWM output and SPI or I2C interface to provide absolute angle measurement for the microcontroller. There is no need to consider the precise matching of the initial zero position of the chip and the magnet poles used in the mechanical design. Instead, the zero position can be programmed through simple SPI or I2C commands (without special programming equipment) as early as the assembly. AS5048 internal memory. Package List: 1 x AS5048A Magnetic Encoder    Package List 1 x AS5048A Magnetic Encoder