Features [ALUMINUM MATERIAL] The air distribution block is made of pure aluminum, which is wear and corrosion resistant and not easy to rust. [STAINLESS STEEL BEADS] The connector has an integrated high-strength stainless steel bead with a solid buckle, and the operation is simple. [EASY TO INSTALL] The multi-way manifold block is small and compact, easy to install, and has good airtightness. [WORKING PRESSURE] The working pressure is 0-0.9MPa (0-0.92Kfg/cm²), with standard G1/4 thread, wide range of applications. [APPLICABLE SCENES] Widely used in engineering projects such as factories, automation equipment, auto repair, electronics, etc. Specification: Item Type: Air Distribution Block Material: aluminum + stainless steel Compressive strength: 1.0MPA (10kgf/cm) Working pressure: 0-0.9 MPa (0-0.92 kfg/cm²) Adaptation temperature: 0-60℃ Connector Inner Diameter: Approx. 13mm/0.5 inch Specification: ModelOverall LengthWays/HolesLength x WidthThread Center DistanceSML-265mm/2.6in2 way 5 holes20 x 20mm/0.8 x 0.8inG1/4(12mm)30mm/1.2inSML-395mm/3.7in3 way 6 holesSML-4125mm/4.9in4 way 7 holesSML-5155mm/6.1" 5 way 8 holes, SML-6185mm/7.3" 6 way 9 holes Package list: 1 x Air Distribution Block Note: 1. Do not unplug and plug the hose frequently while using the connector, it will affect the life of the connector and hose2. The tube inserted into the connector must be inserted to the bottom of the joint to avoid the possibility of air leakage3. When pulling out the hose, first make sure there is no pressure in the pipe, push the end cap of the connection to the end and pull out the hose4. Please note that the new and old type of this product will be shipped at random. Before ordering, make sure you don't mind. Package List 1 x Air Distribution Block