Our mini heat machine is lightweight, compact, and easy to handle, making it perfect for both professional and home use. It's small size allows it to fit into tight spaces and storage areas with ease. Features: 300W High Power: This 300W high power heat machine can quickly heat up to 536/280 in seconds, and the ring air outlet design makes our heat gun produce even air and stable temperature, which can make your work more efficient. Quality Material: The hot air machine is made of high quality stainless steel inside and ABS plastic outside, heat resistance, lightweight, simple and High quality. Easy to Use: When using the heat machine, just press the button to open it, keep the nozzle 3-5cm distance from your items and better to heat it at about a 45 degree angle until completed. Unique Design: Pencil-shaped design has a smaller size and lighter weight making the hot air machine fit comfortably in your hand, easy to carry and store. The retractable metal bracket keeps the heat machine stand on the table stably and uses hands-free. The heat vents of heat machine tail can decreased the internal high temperature and extend the life. Multi Occasion Usage: The mini heat machine can be used for heating shrinkable film, clay, embossed powder, rubber stamp, remove old painting, heat to shrink film, defrost and remove mud and dirt etc. HOW TO USE 1. Put the plug into the socket - (Be sure that the switch is on the position of "OFF"). 2. Turn on the product - (Be sure that the motor is running well by judging from the sound). When operating on a new product, there may smoke be emitted from the main body of product at the end of the process (when turn off the product). That is caused by the oil residue remained from the production process, non-quality problem. After the switch is turned on, hot-blast air will be blown out immediately. Never face the hot air-outlet, or point it directly at others. That may cause danger of burn. 3. Embossment operation - turn on the switch, don't block the vent, the items that need be operated on should be kept a distance of 3-5 cm, heating at an angle of about 45 degrees. (Please do not heat vertically on the surface of the items, or that will cause overheating). It is completed when the embossment powder melted, and the patterns projected out. 4. When in the pause of process, please turn off the switch. 5. After use - pull out the plug off the socket by pinching on the plug firmly, ( never by pulling the power wire). Put away the product when it completely cooled down (after about 7-10 minutes). Specifications: Material: Stainless Steel +ABS Color: White Rated Voltage: 110V Rated Frequency: 60Hz Power: 300W Current: 2.5A Temperature: About 230~280 / 446~536 Item Size: 235 * 55 * 45mm / 9.25 * 2.16 * 1.77in Item Weight: 355g / 12.52oz Package Weight: 400g / 14.11oz Package Size: 26 * 8.7 * 5.6cm / 10.23 * 3.42 * 2.20in Package List: 1 * Hot Air Tool 1 * User Manual (English)