Features: ADXL362 is low power, 3-Axes accelerometer, output data rate of 100 Hz when power is belows 2μA, the motion power consumption is 270nA. Periodic sampling is achieved with the use of low-power accelerometer different, ADXL362 no aliasing due to sampling by the input signal; it use the full data rate of the entire bandwidth of the Sensors is sampled. ADXL362 typically provide 12 output resolution; in the lower resolution is sufficient. Measuring ranges of ±2g, ±4g and ± 8g, the resolution within the ranges of ±2g of 1mg.ADXL362 noise level is lower than the normal requirements of 550μg / √Hz applications can select one of two low-noise modes (typically up to 175μg / √Hz), one of the power supply current increases minimal. In addition to low power, ADXL362 also have a number of features to achieve true system-level energy efficiency. The device contains a depth modes output, a built-in power temperature sensors and several motion detection modes, including adjustment threshold sleep and wake modes, in this modes when measurement at a rate of about 6 HZ power consumption as low as 270nA. If necessary, when motion is detected to provide a pin output to directly control external switches. In addition, ADXL362 also supports sampling time and / or system clock for external control. ADXL362 can operate over a wide supply voltages ranges of 1.6V to 3.5V, can use low supply voltages operation independent of the host interfaces when necessary. Specifications: Component:ABS Size:Approx.21x14mm/0.83x0.55inch Package Includes: 1Pc Sensors Module note: 1.Please allow 1-2cm errors due to manual measurement, making sure that you not mind before order. 2.Due to the differences between different monitors, the picture may not reflect the actual of the item.