Adjustable Timer Hanging Electric Cradle Control

Accompanied by steady vibration and sound, this baby cradle controller can make your baby fall asleep. This will not only support your child's sleep but also free up your mother's hands. Its layout of the control panel and timer function allows you to operate it.Key FeaturesStable Vibration: This baby cradle controller produces a stable vibration frequency that imitates the gentle embrace of the mother so that the baby can fall asleep quickly.Free Up Hands: Putting your baby in a bassinet with steady vibrations and upbeat songs can lighten your load, and say goodbye to the hassle of holding your child all the time.Weight-bearing Capacity: Seven thickened springs provide the product with a weight-bearing capacity of about 41.88 pounds.Timer Function: The baby cradle controller features a 60-240 minute timer function that increases by 60 minutes with each button press. The timer-off function allows vibration and music not to wake the baby.Adjustable Design: The music volume has ten levels so you can adjust it as you wish. The vibration frequency can be adjusted according to your child's condition.Energy-saving: The controller has only 12V voltage and 8 to 12W power making it power-saving. Its structure allows you to use it.Adjustable Load-bearing Capacity: The recommended maximum load of the baby bassinet rotation control is 19kg, 2 for 2.5 to 5kg, 3 for 5 to 7.5kg, 5 for 10.5 to 13kg/28.66lbs, and 7 for 16 to 19kg. The adjustable weight-bearing capacity allows it to accompany children at different stages of growth.DetailsDisplay: The display can show the setting time for setting.Extended Power Cord: The extended power cord is 8.2 feet long.Wall Hanging Hole: Wall hanging hole is designed to hang on the wall.S-shape Hook: The S-type hook can be well connected to the cradle and the controller. The S-shape hook will not be deformed even after a long time of use.ApplicationIt is suitable for babies weighing less than 41.88 pounds. It is suitable for families, nurseries, etc.InstallationStep 1: First determine the total weight (baby + cradle + baby quilt)Each spring can load 2.7 kg/5.95lbs, there are 7 springs in total, and the maximum load is 19 kg/41.88lbs. The total weight must be consistent with the number of springsStep 2: Install the springInstall the springs in the small holes at both ends, and hang the motor and the tripod downwardWhen hanging the spring, ensure the left and right balance.Step 3: Use the hook to hang the cradle on a rack or top plate, turn on the power, and then turn it on. The speed is adjusted to the appropriate speed according to the swing amplitude. The bottom of the cradle is about 60cm/23.62in away from the ground.SpecificationModel: RF-289Material: Plastic, IronColor: GreenTiming Range: 60/120/180/240minMax. Load-bearing Capacity: 19kg/41.88lbsLoad Capacity per Spring: 2.7kg/5.95lbsGross Weight: 1.4kg/3.08lbsPackage Size: 25*13*13cm/9.84*5.11*5.11inProduct Size: 18*8*8cm/7.09*3.15*3.15inPackage Included1*Baby Cradle Controller1*Power Cord7*Springs2*Triangular Iron3*S-shape Hooks1*Rope1*Chinese and English ManualDo not tilt and pull the tensioner when fixing the wire.The spring must be increased when the weight of the baby exceeds the weight that the spring can bear.