1PC 8 mm Shank Wood Router Bit — Edge Trimmer (R1 mm / R2 mm / R3 mm), 4 Teeth — for 0.5–3 mm Edge Banding Why you need this Designed specifically for trimming after edge banding. Delivers clean, smooth edges that require less sanding and touch-up. Four cutting teeth provide a consistent finish and extend tool life compared with fewer-flute cutters. Fits routers or trimmers that accept an 8 mm shank for easy, stable installation. Key features Function: Edge trimming router bit for removing excess edge tape and trimming glued-on edges. Profiles: Available in R1 mm, R2 mm, or R3 mm radii to match different edge profiles and achieve the desired corner rounding. Shank size: 8 mm for secure mounting and reduced vibration. Teeth: 4 cutting edges for smoother cuts and reduced tear-out. Compatible edge thickness: Designed for edge banding and tapes from 0.5 mm to 3 mm. Performance benefits Produces neater, more durable edges that cut down on finishing time. Stable 8 mm shank reduces runout for accurate trimming along long edges. Four-tooth geometry helps deliver uniform chip clearing and a superior surface quality. Typical applications Trimming PVC/ABS/veneer edge banding on cabinet doors and furniture panels. Finishing laminated or veneered plywood and MDF panels after edge gluing. Trimming thin veneer or tape edges on shop fixtures and custom millwork. Notes for use Ensure your router/trimmer accepts an 8 mm shank before installation. Match the chosen radius (R1/R2/R3) to your desired edge profile. Designed specifically for edge band thickness between 0.5 mm and 3 mm. Contents 1 piece 8 mm shank wood router bit (select R1 mm, R2 mm, or R3 mm profile).