1. 3 frequency ranges, frequency modulation (FM) 87-108MHz, medium wave (MW): 522-1620KHz, short wave (SW): 4.75-21.85MHz 2. Low distortion, with a maximum output distortion of ≤ 10% 3. Low energy consumption, clock mode standby static current only ≤ 25uA. 4. Fully functional and easy to operate. 5. Support timed startup switch 1. Frequency range: Frequency modulation (FM): 87-108MHz; Medium wave (MW): 522-1620KHz; Short wave (SW): 4.75-21.85MHz 2. Noise limiting sensitivity: Frequency modulation (FM): 30dB ≤ 8dBu; Amplitude modulated medium wave (MW): 26dB ≤ 60dBu; Amplitude modulated short wave (SW): 26dB ≤ 32dB<br><br>3. FM stereo separation: 98MHz ≥ 20dB 4. Signal to noise ratio Frequency modulation (FM): 98MHz ≥ 50dB Medium wave (MW): 1000KHz ≥ 40dB 5. Maximum output power Earphone: ≥ 100mW * 2 Speaker: 4 ohms/5W 6. Maximum instantaneous working current: ≤ 500mA 7. Maximum output distortion: ≤ 10% 8. Clock mode standby static current: ≤ 25uA (lithium battery can stand by for 1 year when fully ) 9. PCBA size: 58x49x10mm Kind reminder: The radio is used to receive signals emitted by broadcasting stations, and the reception effect varies depending on the listening environment. For areas or buildings near large signal stations, due to signal interference or shielding, when listening to a certain radio wave, there may be mixed or all noise, which cannot be eliminated! When listening, it is recommended to stay as far away from household appliances as possible and adjust the antenna direction as close to and as possible! It's DIY kits, needs to finish by yourself. Color:As Shown Material:plastic+metal<br><br>Package Contents: 1 * Radio module 1 * Battery (3.7V/1000mAH lithium battery) 1 * Speaker 1 * Telescopic antenna 1 * Magnetic rod antenna<br><br>Only the above package content, other products are not included. Note