Feature: 1. Adjustable Color Temperature and Brightness: It also has 2700‑6500K color temperature and 0‑100% adjustable brightness. With 80W high power, this lamp can continuously release a stable and efficient light source. 2. Light Source: Provide color rich light source, CRI95+, TLCI 96+, to ensure that the light source has a high degree of restoration of the skin color of the person and the object's original color, so that the object looks more natural. 3. APP Control: Support cell phone APP control LED lights, a total of 32 channels, 5 groups, 99 lights, 200 ID settings, you can control multiple LED photography lights at the same time without interference, adding more convenience for the work. 4. Two Power Supply Types: It can be powered by the power cord or 2 NP F950 970 batteries, providing a lasting light source for outdoor shooting. 5. Practical Design: It is compatible with 8‑10mm mounting hole. Handle can be tilted to meet your different photographic needs. 6. Suitable for Multiple Scenes: Such as still life shooting, portrait shooting, live streaming, vlog, commercial photography, studio photography, film and television shooting, TV broadcasting, etc. Specification: Item Type: LED Video Light Material: Plastic Weight: Approx. 2622g/92.49oz Power: 80W CH: 1-32 GR: A, B, C, D, E Brightness: 0%-100% Color Temperature: 2700K-6500K Numinous Flux (lm): 11000-15000 (with lampshade) CRI: 95-97 TLCI: 96-99 Power Supply: AC100-240V 50-60Hz or 2 NP F950 970 batteries (shipped without batteries)1. Power connectionUse the provided power cord or NP F950 970 battery (purchased separately) to turn on the LED light.(1) When using the power cord connection, turn the switch to the "AC" position to turn on the LED.(2) When using the NP F950 970 battery, turn the switch to the "DC" position to turn on the LED.(3) Turn the switch to the "OFF" position to turn off the LED.Note: When using utility power, the maximum output power of LED light is 80W. When using battery power, the maximum output power of LED light is 60W.2. Beep setting (1) Long press the regulator for 3 seconds, then short press the regulator twice, the LCD screen will appear BEEP.(2) Turn the knob clockwise, the beep sound turns on.(3) Turn the knob counterclockwise to turn the buzzer sound off.Note: The buzzer only works when using the remote control to mediate.3. Set channel and group (1) Short press CH GR button, the number beside CH on LCD screen flashes, rotate the regulator to set channel 1‑32.(2) Press CH GR key again briefly, the number beside GR on LCD screen flashes, rotate the regulator to set group A‑E.4. Set brightness and color temperature(1) Short press the SET key once, the arrowhead points to the color temperature, rotate the adjuster to adjust the color temperature 2700‑6500K.(2) Short press the SET key once more, the arrowhead points to the power, rotate the regulator to adjust the power 0‑100%.Note: When the LED light is powered by power cord, the maximum output power is 80W. When the LED light is powered by NP F950 970 battery, the maximum output power is 60W5. Set the light number and ID (1) Press and hold the regulator for 3 seconds to go to SET page. Rotate the regulator to set the light number 1-99. (2) Short press the regulator once, the arrowhead corresponds to ID. Rotate the regulator and set ID 1-200 (3) Long press the regulator for 3 seconds to save the setting and exit. 6. Use cell phone APP to control LED lights (1) Open the BT of your cell phone. (2) Scan the QR code on the manual to download the APP. (3) Click on the setting, enter the identification code. The identification code and the ID of the light to be controlled should be consistent. Click Save. (4) Click Scan. The lights with the same identification code will be displayed automatically.. Package List: 1 x LED Light1 x Standard Cover1 x Protective Cover (Installed)1 x Power Cord1 x Instruction Manual Note: It can be used with for Visico VC‑501TX, VC‑801TX transmitters, which need to be purchased additionally.