Descriptions: _x000D_ The 702 MS-HC is available in manual start versions, offering an excellent range of engine monitoring and protection features.The module has been designed to monitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input. The DSE701 module includes a remote start signal input. This input allows the module to be started from a pre-defined remote location. _x000D_ _x000D_ _x000D_ Features: _x000D_ This generator controller is microcomputer control. _x000D_ The generator controller is started and stopped manually. _x000D_ With the function of LED indicating fault information. _x000D_ With LCD running accumulative time. _x000D_ With lubricating oil low pressure protection, the module has been designed to monitor low oil pressure. _x000D_ It also has the capability to monitor battery charging by utilizing the WL terminal on the charge alternator._x000D_ _x000D_ When the module detects a fault condition it automatically shuts down the engine. _x000D_ With cool water temperature protection._x000D_ _x000D_ With engine overspeed protection. _x000D_ _x000D_ _x000D_ Specifications: _x000D_ Model: 702 MS-HC _x000D_ _x000D_ Size: 8.5 x 7 x 3.8cm/3.45 x 2.76 x 1.50inch _x000D_ Weight:157g_x000D_ _x000D_ _x000D_ _x000D_ Benefits: _x000D_ Hours counter provides accurate information for monitoring maintenance and warranty periods_x000D_ Multiple engine parameters are monitored simultaneously. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Manual Mode Operation: _x000D_ 1.The module is started using the on-board key/buttons_x000D_ 2.The user turns the key to the palm position_x000D_ 3. The engine pre-heat button is then pressed for the required time_x000D_ 4. The start button is then pressed to start the engine_x000D_ 5. To stop the engine the key needs to be turned to the off position _x000D_ _x000D_ _x000D_ Overspeed Protection: _x000D_ _x000D_ The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively)._x000D_ During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to reach its optimum running speed._x000D_ _x000D_ _x000D_ _x000D_ Package Included: _x000D_ 1 x 702 MS-HC Generator Controller _x000D_ 2 x keys_x000D_ _x000D_ 2 x screws