702 MS-HC Generator Controller, Manual Start Generator Controller, Manual Start Generator Controller Board Panel with Keys MAA11

Features Manual: Available in a manual start version, the 702 MS-HC controller provides an excellent array of engine monitoring and protection features. For Monitoring: Manual MS control panels are designed to monitor low oil pressure, high engine temperature, overspeed and user-defined auxiliary inputs. LED Indication of Fault Information Function: The generator controller is controlled by a microcomputer, manually started and stopped, and has the function of LED indication of fault information. Practical: The genset controller is also able to monitor the battery charge by using the WL terminal on the charging generator. When the module detects a fault condition, it automatically shuts down the engine. Remote Start Signal Input: The DSE701 module includes a remote start signal input that allows the module to start from a predefined remote location. Accumulated running time with LCD. Specifications: Model: 702 MS-HC Size: 8.5 x 7 x 3.8cm/3.45 x 2.76 x 1.50inch Weight:157g Features: With cool water temperature protection. With engine overspeed protection. With the function of LED indicating fault information. With LCD running accumulative time. With lubricating oil low pressure protection, the module has been designed to monitor low oil pressure. Benefits: Hours counter provides accurate information for monitoring maintenance and warranty periods Multiple engine parameters are monitored simultaneously. Manual Mode Operation: 1.The module is started using the on-board key/buttons 2.The user turns the key to the palm position 3. The engine pre-heat button is then pressed for the required time 4. The start button is then pressed to start the engine 5. To stop the engine the key needs to be turned to the off position Overspeed Protection:  The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively). During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to reach its optimum running speed. Package Included: 1 x 702 MS-HC Generator Controller 2 x keys 2 x screws Package List