1. The product uses sufficient materials, and uses a customized radiator. The specification: the radiator bottom plate is 5mm thick, the tooth height is 21mm, the length is 85mm, and the width is 63mm. The booster plate is fixed above the radiator. The reasonable design, the integrated design of the radiator and the booster plate, is convenient for users to use directly. When using, it can be directly fixed with long screws.2. The inductance magnetic ring adopts 27mm iron silicon aluminum magnetic ring, 1mm double wound inductance, high-quality filter capacitor, one 1000uF63V electrolytic capacitor is input, and two 470uF100V electrolytic capacitors are output. The quality of the step-up output supply is better, the on-board switch, the supply indicator light, and the voltage regulating and current regulating potentiometers are provided to make the output more convenient.The output voltage and current can be adjusted at any time. 8500 terminal blocks are used for input and output, Strong current passing capacity, ensuring long and reliable operation. Module nature: non isolated booster module (BOOST) Input voltage: 12-60VDC input (for wide input voltage range applications) Input current: 15A (MAX) More than 10A, please strengthen heat dissipationStatic working current: 15mA (measured when 12V rises to 20V, the higher the output voltage, the more static current will increase)Output voltage: 12-80VDC, continuously adjustable, applicable to applications where the input voltage is less than the output voltage, without voltage reductionOutput current: 10A MAX more than 10A, please strengthen heat dissipation (related to input and output differential pressure, the greater the differential pressure, the smaller the output current)Maximum output :=input voltage x 10A, for example: input 12V x 10A=120W, input 24Vx 10A=240W, input 36V x 10A=360W, input 48V x 10A=480W, input 60V x 10A=600WIf higher is required, two modules can be used in parallel. For example, if the output is 15A, two modules can be used in parallel, and the current of each module can be adjusted to 8A.Working temperature: - 40~+85 (please strengthen heat dissipation when the ambient temperature is too high)Operating frequency: 150KHzConversion efficiency: up to 95% (efficiency is related to input, output voltage, current and differential pressure)Overcurrent protection: Yes (if the input exceeds 17A, the output voltage will be automatically reduced, with a certain range of error.)Short circuit protection: double short circuit protection (input 20A fuse)Input reverse connection protection: NoneProduct size: 85 x 62 x 60mmColor: greenMaterial: PCB+MetalPackage Contents:1 x 600W DC-DC modulesOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.