6-Pack LED Wall Lights, Solar Outdoor Spotlight

This outdoor solar-powered LED wall luminaire is an autonomous architectural lighting fixture engineered for flush-mount installation on perimeter fences, step risers, patios, and exterior wall pathways. Utilizing an integrated polycrystalline photovoltaic cell and an automatic optical sensor array, the unit harvests solar radiation during daylight hours to charge its internal energy storage, enabling automatic downlight illumination throughout low-ambient night cycles without external electrical infrastructure. Key FeaturesPhotovoltaic Energy Conversion: Outfitted with an integrated low-profile polycrystalline silicon solar panel designed to fully replenish internal energy reserves within 6 hours of unshaded direct outdoor sunlight exposure. Autonomous Optical Logic Switching: Features a built-in light-control circuit matrix that automatically disables the LED array to initiate charging cycles during daylight, and activates illumination at nightfall. Surface-Mount LED Array: Outfitted with 6 premium SMD 2835 light-emitting diode beads to provide concentrated, directional downward or outward luminous flux. Ingress-Sealed Structural Shell: Enclosed in a composite polymer chassis rated at an IP65 protection standard, providing mechanical defense against water spray, dust ingress, thermal weathering, and structural cracking. Internal Battery Architecture: Contains a replaceable standard AA NiMH rechargeable energy cell managed by a 30mA stable discharge current framework. Technical SpecificationsProduct Typology: Flush-Mount Outdoor Photovoltaic LED Wall and Fence Light Photovoltaic Panel Specification: Polycrystalline Silicon, 2V / 150mA Illumination Hardware: 6 x SMD 2835 LED Source Beads Optical Spectrum Modalities: Available in standalone Cool White Light or Warm White Light configurations Internal Power Reservoir: 1 x AA 1.2V / 600mAh Nickel-Metal Hydride (NiMH) Battery Electrical Discharge Parameter: 30mA Constant Current Output Terminal Solar Saturation Requirement: Minimum 6 hours of unshaded direct solar exposure Autonomous Operational Duration: 6 to 8 hours of continuous output on a full operational charge Chassis Material Composition: Impact-Resistant ABS and High-Transmittance Polycarbonate (PC) Ingress Protection Level: IP65 Weatherproof Matrix Physical Enclosure Dimensions: 8.9 cm x 5.7 cm x 2.3 cm Unit Net Weight: 68.5 g per module Hardware Deployment ScenariosThe physical footprint and environmental seals of this luminaire conform to deployment in the following outdoor architectural environments: Residential Courtyard Walls, Garden Boundary Fences, and Perimeter Railings Landscape Walkways, Exterior Step Risers, and Porch Foundations Open-Air Patios, Poolside Borders, and Balcony Pillar Mounts