Features: 1. Made of high-quality brass material, wear-resistant and corrosion-resistant, not easy to break, can be used for a long time, durable. 2. Application range: Especially suitable for punching belts, watchbands, leather watchbands, thin rubber, plastic sheets, canvas, clothing, paper, etc. 3. Easy to carry: Easy to disassemble after use and easy to carry, does not occupy space. 4. Easy to clean: You can clean quickly. It can be cleaned and put into a cupboard. It does not occupy a lot of space and can be kept well. 5. If you have any questions, please contact us in time. We will provide you with better products and services. Notice: 1.Actual color may be slightly different from the image due to different monitor and light effect 2.Please allow 1-3cm deviation due to manual measurement Description: Material: Brass Product size: 18*7*2cm Dimensions: Length: about 13cm/5.12"; Hole Diameter: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm. Instructions: 1. Remove the screw on the top of the connecting rod, install the desired punch, and then tighten the screw sleeve to secure the punch. 2. Fix the leather, the hole punch is perpendicular to the leather surface at 90 degrees, press the handle at the required position to punch the hole (if the leather is thick, it needs to be repeated several times). includes: 1 x Leather Drilling Tool