5v Dc Trigger Relay Module For Arduino And Raspberry Pi,6579

₹1,949.00
+ ₹876.49 शिपिंग

5v Dc Trigger Relay Module For Arduino And Raspberry Pi,6579

  • ब्रांड: Unbranded

5v Dc Trigger Relay Module For Arduino And Raspberry Pi,6579

  • ब्रांड: Unbranded
RRP: ₹2,049.00
मूल्य: ₹1,949.00
द्वारा बेचा गया:
₹1,949.00
+ ₹876.49 शिपिंग

अभी उपलब्ध नहीं है

हमें नहीं पता कि यह आइटम कब या क्या कभी स्टॉक में वापस आएगा।

हम निम्नलिखित भुगतान विधियाँ स्वीकार करते हैं

विवरण

5v Dc Trigger Relay Module For Arduino And Raspberry Pi,6579

Product description Material: Electronic material Output driver capacity: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; Easy to use, each output group has a simple 3-wire structure and 6 output terminals are reserved; The input is directly connected to the IO port of the single chip microcomputer or digital circuit, the high level input relay is energized, and the low level input relay is released; The working voltage is 5 V, the pick-up current is approx. 70 mA per channel and the relay status display is available; Full-chip components, reasonable driver circuit design, with 8050 three-tube drive relay action; Equipped with mounting screw holes for easy installation, the size of the circuit board is 1.8cm * 4.0cm * 1.9cm, and the weight is 15g; Quantity: 3-piece set Package content: 3 * 1 relay module 1. This microcontroller compatible board with 1 relay Output driver capacity: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-10A; The 1-channel relay module is equipped with transistor and diode to switch higher loads safely, reliably and with little power. Thanks to its compact size, the 1-channel relay can be used in almost any project. 2. The module is also equipped with a generously dimensioned relay in order to be able to reliably carry out many switching processes. The module can be safely installed in housings thanks to the practical drill holes. 3. The channel of the module is also connected to an LED that indicates the switching status of the relay. The KY-019 relay is used to control AC circuits. The relay acts as a switch that responds to a signal. Because of this, it is widely used in IoT projects to control lights and other electronic devices. 4. Relays are suitable for driving high power electronic devices such as lights, electric fans and air conditioners This relay module can be used to control high voltage with low voltage by connecting it to an MCU 5. Controls DC or AC signals 220V AC load Working voltage: 5V; With operating display and signal output display
  • Fruugo ID: 196674239-419371922
  • EAN: 9067111935981

उत्पाद सुरक्षा जानकारी

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट उत्पाद सुरक्षा जानकारी देखें

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

उत्पाद सुरक्षा लेबल

CE Mark
सुरक्षा चेतावनियाँ: Warning: Keep away from fire when storing. The product should be stored in a dark place, away from high temperature and fire.
सामग्री: plastic

डिलीवरी और वापसी

24 घंटों के भीतर भेजा जाएगा

  • EXPRESS: ₹876.49 - के द्वारा डिलिवरी गुरु 11 दिसंबर 2025 - सस्ता - तेज

  • STANDARD: ₹876.49 - के बीच वितरण मंगल 16 दिसंबर 2025–मंगल 23 दिसंबर 2025

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ