5V 1A UPS Uninterruptible Power Supply Module with 18650 Lithium Ion Battery Boost Step Up Function

Item Type: Power Supply Module_x000D_ Material: PCB_x000D_ Input: 5V 1A_x000D_ Output: 5V 1A (Maximum)_x000D_ Output Power: 5W_x000D_ Battery Supply: Polymer Lithium Battery, 18650 Lithium Battery. (Recommended Capacity Below 10000mA)_x000D_ Input Reverse Connection Protection: Yes_x000D_ Input Overvoltage Protection: Yes_x000D_ Output Reverse Connection Protection: Yes_x000D_ Output Short Circuit Protection: Yes_x000D_ Operating Temperature Range: -40-85_x000D_ Operating Humidity Range: 0-95%RH 1POWER OUTPUT: Uninterruptible power supply module, with maximum output of 5V 1A, and supplied by polymer lithium battery or 18650 lithium battery. 2OVERVOLTAGE PROTECTION: The module has input overvoltage protection. When the input exceeds 6V, the input will be cut off automatically to enter the battery power supply mode. 3REVERSE PROTECTION: The module has reverse connection and short circuit protection. When the external power input exceeds 20V, the protection unit will be broken down. 4GOOD PERFORMANCE: The battery boost module supports simultaneous charging and discharging, with large current and high efficiency, which is stable and reliable. 5WIDE APPLICATION: The power board can be used for battery chargers, mobile power supplies, infrared alarms, switches and other network devices, routers, etc.1. The maximum output current is 1A, and the output 1A cannot be maintained._x000D_ 2. The positive and negative electrodes of the battery must not be reversed, otherwise the module will be damaged._x000D_ 3. Users can install a common anode red green LED as the charging indicator. The red light indicates whether the output terminal is loaded. Green flashes to show capacity. If there is no load or battery, turn off green._x000D_ 4. Due to the large current, it is recommended to use thicker wire. Wire section is greater than 1.5mm2.1 x Power Supply Module