Feature: 1. Detection distance is 2~30cm (can be adjusted through the potentiometer); 35° detection angle. 2. Adjust potentiometer clockwise, the detection distance increases; counter-clockwise tuning potentiometer, detection distance is reduced. 3. The output port OUT can be directly connected to the microcontroller IO port, you can directly drive a 5V relay. 4. Connect type: VCC-VCC; GND-GND; OUT-IO. 5. Adopt the comparator LM393 for stable working performance. 6. The working voltage is DC 3.3V to 5V, red power indicator lights up when power on. 7. With the screw holes of 3mm, easy fixed installation. Specification: The sensor module is perfectly adaptable to the environment light, it has a pair of infrared transmitting and receiving tubes; transmitting tube emits infrared in a certain frequency, when detecting direction meets with obstacles(reflecting surface), reflected infrared will be received by the receiving tube; after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal(1 low level signal). Users can adjust the detection distance through the potentiometer knob, effective distance range 2~30cm and working voltage is 3.3V to 5V. The module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, black and white line tracking and so on many occasions. Features: Detection distance is 2~30cm (can be adjusted through the potentiometer); 35° detection angle. Adjust potentiometer clockwise, the detection distance increases; counter-clockwise tuning potentiometer, detection distance is reduced. The output port OUT can be directly connected to the microcontroller IO port, you can directly drive a 5V relay. Connect type: VCC-VCC; GND-GND; OUT-IO. Adopt the comparator LM393 for stable working performance. The working voltage is DC 3.3V to 5V, red power indicator lights up when power on. With the screw holes of 3mm, easy fixed installation. Specifications: Quantity: 5pcs / 20pcs(Optional) Detection Distance: 2~30cm Detection Angle: 35 ° Working Voltage: 3.3V~5V VCC: External 3.3V-5V voltage(can be directly connected to 5V and 3.3V single-chip microcontroller) GND: GND External OUT: Small board digital output interfaces(0 and 1) Connection: VCC-VCC; GND-GND; OUT-IO Board Size: 31 * 14mm / 1.22 * 0.55in Board Weight(1pc): 3g Package Weight: 18-65g Note: Each module is already adjusted compare threshold voltage through the potentiometer before shipping, please do not arbitrarily adjust the potentiometer when not special circumstances. Package List: 5 * Infrared Obstacle Avoidance Module Package List: 5 * Infrared Obstacle Avoidance Module