ESP32-S3 processor with 8 MB flash and 2 MB of SRAM, fully supporting Arduino and CircuitPython. Built-in WiFi and Bluetooth LE capabilities, with CircuitPython currently supporting only WiFi. USB Type C connector for data and power connectivity. JST 3-pin connector with analog input for easy connection with JST PH 2.0mm pitch cables. Includes LIS3DH accelerometer for digital sand projects or detecting taps/orientation, GPIO breakout strip, user interface buttons, and indicator LEDs. The product features a powerful ESP32-S3 processor with 8 MB flash and 2 MB of SRAM, providing full support for Arduino and CircuitPython. It comes with built-in WiFi and Bluetooth LE capabilities, although CircuitPython currently supports only WiFi. The USB Type C connector allows for seamless data and power connectivity. Additionally, the JST 3-pin connector offers an analog input for quick connections with any JST PH 2.0mm pitch cable. The LIS3DH accelerometer is perfect for digital sand projects or detecting taps and orientation. The GPIO breakout strip includes reset, boot selection, TX debug output, and 6 GPIO pins, with 4 analog inputs supporting PWM, SPI, or I2S for adding other hardware. The product also features two user interface buttons, one reset button, an indicator NeoPixel, and red LED, along with green power indicator LEDs for both 3V and 5V power. The 2x10 socket connector fits snugly into 2x8 HUB75 ports, eliminating concerns about 'off by one' errors. Color: Black Material: PCB Package Contents: 1*5778 Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.