Sturdy and Durable: Steel handles and manganese steel alloy drills have high strength and hardness, and are not easy to rust and corrosion. The aluminum gearbox has high-temperature resistance and good sealing. The high-quality plastic engine housing is drop and impact-resistant and protects the internal parts. Ergonomic Design: The ergonomic double handles are wrapped in rubberized covers for a stable and comfortable grip and are also suitable for two people control that is less effort intensive than single control. Easy to Control: The on/off button and smooth manual starter make it simple to use, so even novices can master it quickly. The digging speed can be adjusted at will by adjusting the force of pressing the throttle switch on the grip to suit different soil conditions. Smooth Running: Smoothly rotating high-speed alloy shaft and enlarged deepened cylinder make it more stable and less noisy when digging holes for your better using experience. Low Fuel Consumption: The high-quality carburetor fully burns the fuel so that the energy can be fully converted, saving you money on fuel. Details Good Heat Dissipation. Precision Gearbox: It greatly improves torque force and wear resistance, giving it strong hole-digging ability and durability. Single Leaf Drill: One-piece single leaf drills are lighter in weight, faster and more durable than double leaf drills. Output Shaft: The 0.7*1.8inch output shaft is suitable for many sizes of drills for greater versatility and easier replacement. Rubber Mat: Rubber mat reduces the vibration of the engine operation to enhance comfort and stability and extend the life of the machine. Application It can be drilled in epidermal turf and clay, and can be used for tree planting holes, fence stakes, greenhouse stakes, fiber optic cable pole stakes, tree fertilization stakes, etc. Drill Installation Steps 1. Connect the drive shaft. 2. Insert the bolt. 3. Put the pin to lock it. Specification Model: IE44F-5 Material: Steel, Plastic, Rubber, Aluminum, Alloy, Manganese Steel Alloy Color: Orange, Black Engine Type: Single Cylinder, 2-stroke, Air-cooled Displacement: 52cc Mixed Fuel: Gasoline:Two-stroke Oil (25:1) Ignition System: C.D.I. Power: 1.46kw Fuel Tank Capacity: 1.2L/0.3gal Maximum Speed: 7500rpm Rated Speed: 8500rpm Horsepower: 1.98hp Drill Diameter: 10cm/4inch, 15cm/6inch, 20cm/8inch Shaft Size: 1.8*4.5cm/0.7*1.8inch Drill Length: 78cm/30.7inch Extension Bar Length: 30cm/11.8inch Engine Size: 25.5*25.5cm/10*10inch Digger Whole Size: 50*22*36cm/19.7*8.7*14inch Drill Package Size: 80.5*23.5*32cm/31.7*9.3*12.6inch Digger Package Size: 39*36.5*28.5cm/15.4*14.4*11.2inch Drill Gross Weight: 9.5kg/20.9lbs Drill Net Weight: 8kg/17.6lbs Digger Gross Weight: 9.1kg/20lbs Digger Net Weight: 8.2kg/18lbs Package Included 1 x Auger Post Hole Digger 3 x Drill Bits 1 x Extension Bar 1 x Fuel Oil Mixing Bottle 1 x Funnel 1 x Spare Starter 1 Pair x Goggles 1 x English Manual Tool Kit for Assembly Notes 1.The tank should be filled with a mixture of oil (gasoline: two-stroke oil = 25: 1). Please add butter to the gearbox. It should be used with two-stroke oil rather than four-stroke oil, otherwise accidents will occur. All oils are excluded. 2.Please start the machine by pulling the starter quickly without stopping in the middle. 3.Press the oil bubble a few more times before starting. If there is oil coming in and out of the fuel line, which means oil has been supplied. 4.Do not use on steep slopes exceeding 15. 5.Please do not drill ice, frozen soil, sandy clay, and sand and gravel mixed soil, or the drill bit will bend easily.