Features 1、SPECIFICATIONS: Vector network analyzer, with 2.8in display, and the frequency range up to 50kHz-3GHz, has compact structure and strong practicability. 2、GOOD PROTECTION: The metal casing is adopted, which can fully protect the internal precise circuit of the analyzer and fully consider the protection of the external interface. 3、CABLE AND CALIBRATION KIT: The included SS405 SMA RF cable provides good amplitude and phase stability, and the calibration kit ensures a calibrated SWR of less than 1.03 up to 3GHz. 4、WITH STORAGE BAG: Equipped with EVA storage bag, lightweight, wear and corrosion resistant, which can well protect the network analyzer from impact and scratch. 5、POWER SUPPLY: With Micro USB data cable, the maximum charging current is 1A, and the analyzer has built in 1950mAh lithium ion battery, convenient to use at any time. Specification Item Type: Vector Network Analyzer Frequency Range: 50kHz-3GHz Frequency Tolerance: 2ppm Frequency Stability: 0.5ppm System Dynamic Range (Calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz) S11 Noise Floor (Calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz) Scanning Speed: 100 points/second Display: 2.8in, 320 x 240 USB Interface: Micro USB Power Supply: USB, maximum charging current 1A Battery: 1950mAh Li ion battery (built in battery) Battery Connector: JST-XH 2.54mm Maximum Scan Point (On Device): 201 Maximum Scan Point (USB): 1024 Port 2 Return Loss (1.5GHz): 20dB typical Port 2 Return Loss (3GHz): 13dB minimum VNA-QT Software Support Platform: For Linux, for Windows (7+), for iOS Plan Package List 1 x Analyzer Host 1 x Micro USB Cable 2 x 30cm SMA Male to Male SS405 RF Cable 1 x SMA Male Calibration Kit Open 1 x SMA Male Calibration Kit Short 1 x SMA Male Calibration Kit Load 1 x SMA Female to Female Connector 1 x Touch Screen Pick and Lanyard Set 1 x User Manual 1 x EVA Storage Bag