Features Precision: Clear laser marking line for convenient reading, measuring faces are fully hardened, precision ground and microlap finished to assure exceptionally accurate measuring. Measuring range is about 5mm~30mm, accurate is 0.01mm. Feature: Measuring Range: 5mm~30mm;measurment acurancy: +/-0.01mm Quality Steel Material: The main micrometer body is made of stainless steel with chrome plated surface, wear-resisting and durable Designed with locking device, precise machinery structure make it more intuitive and convenient to read What You Will Get: You will receive 1x inside micrometer+1x wrench+1x calibration ring+1x wooden packing box. Specifications: Type: Inside micrometer Measuring Range: 5mm~30mm Material: Stainless steel Precision: 0.01mm Weight: 268g(approx.) Zeroing: Clean the surface of measuring anvil heads with a soft cloth, then rotate measuring device to make two measuring surface contact. If two zero lines of differential sleeve and fixed barrel do not alignment, use the following two methods to adjust. Method I, if the error is less than 0.02mm (0.001"), use ratchet stop to lock screw tightly, then use wrench to pull fixed barrel till two zero lines alignment. Method II, if the error is greater than 0.02mm (0.001 "), Step1, use ratchet stop to lock screw tightly, then use wrench to loosen the ratchet stop  and remove differential sleeve. Step2, re-align zero lines of fixed barrel and differential sleeve, then put ratchet stop back on. If necessary, adjust it again using method I. Note: There is no need to calibrate micrometer during common use. Micrometer only need calibration when it is severely worn. Package Includes: 1 x Inside Micrometer 1 x Wrench 1 x Calibration Ring 1 x Packing Box Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List