Features: High input impedance, allowing 120nodes; Low current standbys mode, the typical current is 370A; Signal transfer rate up to 1Mb/s Thermals protections, open fail-safes function: With antimoment interferences protections function bus Slope control, reduce radio frequency interferences (RFI): Differential receiver with wide ranges of anticommon mode interferences, electromagnetic interferences capabilities.Operating mode and control logicsSN65HVD230 highly speed, slope and wait three different mode of operation. Its mode of control can be achieved by control pin. Figure 2 is a SN65HVD230 CAN bus system in a typical application diagram. Can see from the figure, CAN controller is connected to the output pin Tx SN65HVD230 data input terminals D. this CAN nodes can send data transferred to the CAN networking: CAN controller and receive pin of Rx and SN65HVD230 R data output terminals coupled for receiving data. Option SN65HVD230 port via jumpers and sloperesistance ground at one end, a way can be achieved through hardware choose 3mode of operation, in which the slope is 0-100k resistors potentiometer. Specifications: Component:Plastic Size:Approx.17x15mm/0.67x0.59inch Option Type:1pc CAN Bus Transceiver Module,3pcs CAN Bus Transceiver Module Package Includes: Package A 1pc SN65HVD230 CAN Bus Transceiver Module Package B 3pcs SN65HVD230 CAN Bus Transceiver Module note: Please allow 1-2cm errors due to manual measurement. Due to the differences between different monitors, the picture may not reflect the actual item color.