Features 1、Good Adhesion Effect: This pad is covered with microporous coating, which is very adhesive after heating. The adhesion is strong when printing, without the help of masking paper and solid glue. 2、Good Stability: The special coating of this pad is an inorganic coating with a hardness of 8 Mohs and a heat resistance of 400 ℃. It can be used repeatedly without damaging the performance. 3、Easy to Clean: This pad has a thin layer of protection, which is easy to clean with water or alcohol without leaving traces. You can use the pad at will! 4、Easy Model Removal: After the pad cools down, the model can be taken down easily by hand without tools such as a blade. Take it with confidence! 5、Wide Compatibility: This pad can work with multiple materials, including PLA, TPU, ABS, PC, PP, etc. And there are recommended setting temperatures for them! Specification Item Type: 3D Printer Build Sheet Product Size: Approx. 300 x 300 x 4mm / 11.81 x 11.81 x 0.16in Product Use: 3D printer Product Material: Special Tempered Glass, Microporous Coating Applicable to: For Anet E12 E16 for A8PLUS ET5 series, for Artillery SW X1 and other models. Temperature Settings for Different Consumables: 1. PLA: 50 to 70℃ 2. TPU: 50 to 70℃ 3. ABS: 100 to 125℃ (110℃ recommended) 4. PC: 100 to 130℃ (120℃ is recommended) 5. Nylon: 90 to 120℃ (110℃ is recommended) 6. PP: 100 to 130℃ (120℃ is recommended) 7. PETG: 50 to 70℃ Package List 1 x 3D Printer Build Sheet