Feature:1. HIGH PERFORMANCE: The 3D edge finding locator, which is specially designed for CNC milling machines, with high accuracy and good structural stability.2. MULTIPLE FUNCTION: The GND is connected with the output signal line, after the signal is obtained, the macro program is used to realize automatic centering, record coordinates, etc.3. AUTO MEASURING: Online automatic measurement can be realized after connection, and it can be used as an acousto optic beam splitter in 5 directions after offline.4. ALUMINUM ALLOY: The edge seeker is made of 7075 aluminum alloy material, the surface is anodized, wear and corrosion resistant, and has a long service life.5. WITH BATTERY: The 3D edge locator has built in 1000mAh lithium battery, and is equipped with a data cable, which automatically charges after connecting.Specification:Item Type: 3D Edge FinderMaterial: 7075 aluminum alloy, anodized surfaceEdge Finder Outer Diameter: Approx. 39mm / 1.5inProbe Length: Standard approx. 20mm / 0.8in, user can replaceClamping Diameter: Approx. 6mm / 0.24inClamping Length: Approx. <20mm / 0.8inRepeat Accuracy: 0.01mmXY Stroke: 3mm, it will be damaged if it exceeds the strokeZ Stroke: 1.5mm, it will be damaged if it exceeds the strokeOffline Work: Yes, can be used as a photoelectric splitterConnection Work: Yes, it can be used with the system for automatic centeringConnection Method: Approx. 2 meter / 6.6ft data cableProbe Needle: 1mm diameter tungsten steel probe needleProbe: 1.5mm diameter ruby probe probeWaterproof Grade: IP43, can not work in the environment of coolant sprayWorking Voltage: 6-30V, overvoltage burns, low voltage cannot workBattery: 1000mAh lithium battery (automatic charging online, with built in battery).Package List:1 x 3D Edge Finder1 x Cable1 x Wrench1 x Storage BoxNote:Bumping will cause irreversible damage and affect accuracy.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.