Item Type: DC Motor Speed Controller <br>Input Voltage: DC6.5V-55V (the specific voltage must be equal to the rated voltage of the motor) <br>Output Voltage: Linear under load <br>Instantaneous Current: 30A <br>Continuous Current: ≤20A <br>Speed Regulation Type: Current Regulation <br>Speed Adjustment Method: Jog + - <br>Wireless Remote Control: Not supported <br>Timing: Yes <br>Slow Run Slow Stop: Can be set <br>Speed Digital Display: 0-100 percentage <br>Speed Range: 0-100% <br>Control Frequency: 15KHZ <br>Connection Type: Fence type terminal <br>Support Motor: Brush Motor <br>Module Size: 116x76x30mm / 4.57x2.99x1.18in <br>Mounting Size: 109x70mm / 4.29x2.76in <br>Installation Method: Panel type <br> <br> <br>Function: <br>1-2-3-4-5-6-7-8-9 function settings are as follows: <br>Slow Run Time Setting Function 1: 000-100, slow start to 100% speed, adjustable time 0-10s, default is 1s. <br>Slow Run Time Setting Function 2: 000-100, slow stop, adjustable time 0-10s, default is 1s. <br>Speed Lower Limit Setting Function 3: 000-080, adjustable minimum speed 0-80% and less than the maximum speed setting value, default is 0. <br>Speed Upper Limit Setting Function 4: 000-100, adjustable maximum speed 0-100% and greater than the minimum speed setting value, default is 100%. <br>Acceleration/Deceleration Value Setting Function 5: 001 002 005 010 015 020 025, Each time the key increase/reduce is pressed, the speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%. <br>Motor Running Time Setting Function 6: 1s to 99h 59min 59s, default is 99h 59min 59s. <br>Motor Stop Time Setting Function 7: 1s to 99h 59min 59s, default is 99h 59min 59s. <br>Cycle Times Of Motor Run Stop Function 8: Adjustable 1-999 times, default 999 times <br>With/Without Timing Selection Function 9: 0: Without, 1: With, Default 1 With<br>1、Backlight LCD screen displays working time and 0-100% speed percentage. <br>2、Can set slow run/stop time and automatic run/stop times. <br>3、The <br> <br>upper limit and lower limit of the speed can be set, change the speed by buttons rather than the potentiometers that is easy to damage. <br>4、Can set the total working time, the motor stops when the time is up. <br>5、Can set run time and stop time, repeatedly and automatically cycle run and stop.The input positive negative pole must be connected correctly. The input voltage(6.5V-55V) must be equal to the rated voltage of the motor.1 x Motor Speed Controller