Item Type: MPPT Solar Controller <br>Material: Plastic <br>Gross Weight: 306g / 10.8oz <br>Product size: 74x74x32mm / 2.9x2.9x1.3in <br>Load Discharge Current: 20A <br>Output Power: 300W <br>Photosensitive: No output during the day, load output at night, suitable for street lamps <br>Efficiency: ≥95% <br>Noise: <55dB <br>Application: Solar street light controller scene <br>No Load Loss: 30MA <br>Voltage Regulation Rate: 1% <br>Load Regulation: 5% <br>Full Load Ripple: 400mV <br>No Load Ripple: 100mV <br>Discharge Module Input Voltage: Equal to battery voltage <br>Load Output Voltage: Equal to battery voltage <br>Load Output Current: 30A (Max 32A) <br>Static Power Consumption: 12mA <br>Load Output Mode: Photosensitive <br>Battery Terminal Short Circuit Protection: Yes <br>Load Short Circuit Protection Yes <br>Temperature Protection: Yes <br>Protection Class: IP67 <br>Working Temperature: -40℃-+65℃<br>1、300W 20A: The MPPT photovoltaic controller uses solar maximum power point tracking (MPPT) technology. 300W output power, 20A load discharge current. <br>2、High Efficiency: The photovoltaic solar controller adopts a high efficiency synchronous rectification circuit structure. Performance upgrade, efficiency improvement. <br>3、Multiple Protections: Short circuit protection, over temperature protection, solar input undervoltage protection, battery undervoltage protection, load port short circuit protection. <br>4、Applications: Photosensitive solar controller, no output during the day, load output at night, suitable for street lights. Energy saving and environmental protection. <br>5、Installation Attention: The output and input lines can be connected and installed according to the applicable voltage. There is high voltage and high current in the machine, and non professionals are not allowed to disassemble.1.The MPPT controller should be fixed on an iron or metal bracket to avoid the vibration of the machine due to instability. <br>2.The MPPT controller should allow some space around the enclosure. <br>3.Output and input wires should be kept as short as possible to avoid excessive energy dissipation during transmission. <br>4.There is high voltage and high current in the machine, and non?professionals are not allowed to disassemble. <br>5.The input and output terminals should be reliable and not loose, so as to avoid heating at the connection point.1 x Solar&nbsp;Charge&nbsp;Controller