With a wide input voltage range from 6V to 40V,-down converter can accurately adjust output voltage and current. The efficiency can be up to 96%,measured at 20A,converting 24V to 12V. It is designed with 75V/80A current dual MOS tube. Input and output use high frequency low resistance electrolytic capacitor,low ripple,stable output. Wiring is convenient with these current 30A screw terminals. The module has 2 heat sink that could enhance heat dissipation. When there is a between input and output voltage,decrease power and current. Input Voltage: 6V to 40V DC(10V to 40V is suggested) Output Voltage: 1.2V to 36V DC Output Current: 20A(max.),15A(suggested) Efficiency: 95%(24V to 12V,20A) Output Ripple: less than 50mV Wiring : Terminal Short Circuit Protection: Self-recovery (cannot short circuit for long time) Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06inch VO+: Output positive VO-: Output negative +IN: Input positive -IN: Input negative CV: Output voltage adjustment CC: Output current adjustment EN: Enable,low voltage level shut off output; suspension,high voltage level is effective When input and output is common grounded,no-load CV output constant voltage,CC output constant current Colour:As shown Material:PC+Metal Package Contents: 1 x 300W 20A Converter Only the above package content,other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.