2x White PTFE M8 x 500 mm Threaded Rods, Plastic Studding + 4 Nuts

BP1: Pack of 2 threaded rods. Colour: White. Material: PTFE / Polytetrafluoroethylene. Length: 500mm. Diameter: 8mm. Pitch: 1.25mm. 4 nuts included (2 per rod). SKU: 958.. BP2: M8 PTFE gives a larger plastic thread for light alignment bars, spacer runs and adjustable positioning.. BP3: Non-conductive PTFE can help keep the fixing path separate from nearby conductive parts in suitable builds.. BP4: The 500 mm rod can be used as a longer threaded section or cut into custom lengths.. BP5: Use for light non-metallic spacing and alignment; confirm thread engagement and material suitability before fitting. Also known as studding, allthread, threaded bar.. || PRODUCT DESCRIPTION SUMMARY: These M8 x 500 mm white PTFE threaded rods are supplied as two larger fully threaded plastic bars. M8 gives more handling area than smaller PTFE sizes and is useful for light alignment bars, adjustable spacer runs and non-metallic threaded sections where a smooth plastic thread is preferred. PTFE offers low friction, electrical insulation and broad chemical compatibility in suitable conditions. PTFE is relatively soft and can deform under sustained loads, so it should be used where this behaviour is acceptable. Cut carefully if shorter sections are required and use compatible M8 nuts without excessive torque. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M8 x 500mm. Colour_Ref: White. Material_Ref: PTFE / Polytetrafluoroethylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 500 x 8 x 8. || Additional Specifications: Pitch_MM: 1.25. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Polytetrafluoroethylene, Head/Drive Type: Fully Threaded Rod, size: M8 x 500, D: 8 mm, Pitch: 1.25 mm, L: 500 mm