2x White PTFE M5 x 300 mm Threaded Rods, Plastic Studding + 4 Nuts

BP1: Pack of 2 threaded rods. Colour: White. Material: PTFE / Polytetrafluoroethylene. Length: 300mm. Diameter: 5mm. Pitch: 0.8mm. 4 nuts included (2 per rod). SKU: 1043.. BP2: Compact M5 format gives a manageable plastic thread for short stand-offs and small alignment points.. BP3: PTFE provides low surface friction and electrical insulation in a non-metallic threaded form.. BP4: The 300 mm length reduces waste where only a short threaded section is needed.. BP5: Use for light-duty compact spacing and custom fixing points; tighten by hand or with low torque. Also known as studding, allthread, threaded bar.. || PRODUCT DESCRIPTION SUMMARY: These M5 x 300 mm white PTFE threaded rods are supplied as a pair of fully threaded plastic bars. The 300 mm M5 format works well where a small threaded section is useful but a longer rod is not required. Use them for short stand-offs, light spacing, enclosure work, alignment points and custom non-metallic threaded sections. PTFE gives low friction, electrical insulation and broad chemical compatibility; tighten by hand or with low torque. Cut carefully if a shorter section is needed. Supplied with 4 nuts. Typical uses: semiconductor and electrical assemblies, clean rooms, chemical-resistant and high-temperature work such as powder coating and test rigs, and wet, marine or outdoor projects.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M5 x 300mm. Colour_Ref: White. Material_Ref: PTFE / Polytetrafluoroethylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 300 x 5 x 5. || Additional Specifications: Pitch_MM: 0.8. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Polytetrafluoroethylene, Head/Drive Type: Fully Threaded Rod, size: M5 x 300, D: 5 mm, Pitch: 0.8 mm, L: 300 mm