2x White PTFE M4 x 500 mm Threaded Rods, Plastic Studding + 4 Nuts

BP1: Pack of 2 threaded rods. Colour: White. Material: PTFE / Polytetrafluoroethylene. Length: 500mm. Diameter: 4mm. Pitch: 0.7mm. 4 nuts included (2 per rod). SKU: 952.. BP2: M4 gives a practical small thread for stand-offs, spacer stacks and light non-metallic fixing work.. BP3: PTFE’s low-friction surface can help when nuts need to be positioned or adjusted along the rod.. BP4: Fully threaded from end to end, allowing compatible nuts to be positioned along the rod.. BP5: Use with compatible M4 nuts for light spacing, alignment and enclosure work; check suitability before final fitting. Also known as studding, allthread, threaded bar.. || PRODUCT DESCRIPTION SUMMARY: These M4 x 500 mm white PTFE threaded rods are supplied as two fully threaded plastic bars for light-duty metric spacing, stand-offs and non-metallic fixing. The M4 thread is compact enough for small assemblies. PTFE provides a low-friction, electrically insulating plastic thread with broad chemical compatibility in suitable environments. PTFE is relatively soft and can deform under sustained loads, so it should be cut, clamped and tightened with care. The 500 mm length can be used for longer spacer runs or cut into shorter matched sections. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M4 x 500mm. Colour_Ref: White. Material_Ref: PTFE / Polytetrafluoroethylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 500 x 4 x 4. || Additional Specifications: Pitch_MM: 0.7. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Polytetrafluoroethylene, Head/Drive Type: Fully Threaded Rod, size: M4 x 500, D: 4 mm, Pitch: 0.7 mm, L: 500 mm