2x White PTFE M3 x 1000 mm Threaded Rods, Plastic Studding + 4 Nuts

BP1: Pack of 2 threaded rods. Colour: White. Material: PTFE / Polytetrafluoroethylene. Length: 1000mm. Diameter: 3mm. Pitch: 0.5mm. 4 nuts included (2 per rod). SKU: 998.. BP2: PTFE gives low friction, electrical insulation and broad chemical resistance, useful where a small non-metallic threaded rod is preferred.. BP3: Fine M3 format — suited to light spacing, alignment and isolation jobs rather than high-load fastening.. BP4: Fully threaded along the full 1000 mm length, so it can be used as a long rod or cut into shorter plastic studs.. BP5: Use with correctly sized metric nuts and washers; avoid over-tightening because PTFE is relatively soft. Also known as studding, allthread, threaded bar.. || PRODUCT DESCRIPTION SUMMARY: These M3 x 1000 mm white PTFE threaded rods are supplied as a pair of fully threaded plastic studding bars. The small 3 mm diameter and 0.5 mm pitch suit fine spacing, alignment and isolation work where a metal rod is not required. PTFE gives a low-friction, electrically insulating, non-metallic thread and broad chemical resistance for suitable environments. Because PTFE is relatively soft and can deform under sustained loads, it should be used for light-duty assemblies with load, thread engagement and chemical compatibility checked before use. The 1000 mm length can be cut down to shorter studs or spacer rods as needed. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M3 x 1000mm. Colour_Ref: White. Material_Ref: PTFE / Polytetrafluoroethylene. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 1000 x 3 x 3. || Additional Specifications: Pitch_MM: 0.5. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Polytetrafluoroethylene, Head/Drive Type: Fully Threaded Rod, size: M3 x 1000, D: 3 mm, Pitch: 0.5 mm, L: 1000 mm