Use: Vehicles & Remote Control Toys; Material: Composite Material; color:blue; RC Parts & Accs: Crystals; Four-wheel Drive Attributes: Assemblage; Tool Supplies: Assembly Category; For Vehicle Type:Cars Model Number: for 1/10 HPI AXIAL; Technical parameters: Value 2; Upgrade Parts/Accessories: LED Lighting; Remote Control Peripherals/Devices: LED Lighting; Features:12 LED lights. Simulation car light. Simple and easy to use Far flashing, super bright. Improved design of circuit board, HOSI power saving Headlight white, blue taillight, brake light red, turn light yellow. Suitable for 1/10 RC cars Specifications: Name: 12 LED Lighting System Kit LED bulb quantity: 12 Working Current: 100mA Input voltage: 4.8V - 6.0V Connection method: CH1 - CH2 - Speed controller CH3 - Receiver Suitable for: 1/10 RC cars LED cable length: about 300mm Circuit board size: 53 * 33 * 15mm Weight: 57.2g / pcs Lights Headlights: 4 white LED lights Connect the lighting system to the CH3 on receiver: the transmitter can independently control a group of lights, another group of lights are on when the car speed up; Not connect to the CH3 on receiver: one group of lights are always on, another group of lights are on when the car speed up. Turn lights: 4 yellow LED lights With the remote control change the direction, the lights will synchronous flashing. Taillights: 2 blue LED lights, 2 red LED lights The blue lights are always on. When the car speed up or brake, blue lights will go out. Only when brake, the red lights on. Installation Method: CH2 Transmitter: Connect the plug of and ESC to the CH1 and CH2 on lighting system, and then connect the CH1 and CH2 to receiver. CH3 Transmitter: Connect the plug of and ESCto the CH1 and CH2 on lighting system, and then connect the CH1, CH2 and CH3 to receiver. Package Contents: 2 * LED Lighting Kit Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.