2PCS 30LED USB Rechargeable PIR Motion Sensor Closet Night Light Cabinet Lamp Product description： 30 LED motion sensor wall lights use passive infrared technology with 120-degree omnidirectional motion sensing. It can be installed indoors and outdoors, without wiring and without holes. Make your life bright and convenient. 3 Secondary dimming mode: Press the [123] button to adjust the brightness: 10LED, 20LED, 30LED brightness, the indicator light will turn green and blink, and the human motion in night light can be detected. When a movement within 10ft / 120 ° is detected, the LED wall light will immediately light up. If no motion is detected, the light automatically turns off after 15 seconds. Always on mode: Press and hold the button labeled [123] for three seconds, the indicator light will turn red, and it is always on. You can use the wireless motion sensor LED light as a flashlight and table lamp. It remembers your last brightness setting and doesn't need to be adjusted every time to keep your child safe. Note: When the LED wardrobe light is blinking, it proves that the battery is low and needs to be charged. Durable and environmentally friendly: Our premium motion sensor lights are made from an aluminum alloy housing that is durable and stylish. The motion sensor light has a built-in rechargeable battery, no additional AAA battery is needed, energy saving and environmental protection, saving money . When the LED closet light blinks, it proves that the battery is low and needs to be recharged. Scope of application: This multifunctional cabinet light is very suitable for bedrooms, bedrooms, cabinets, corridors, workshops, basements, garages, stairs, fuel tanks, doors, garage entrances, hotels, camping, night reading and other places. Specifications: Induction method: human infrared sensor Induction control: built-in light sensor Induction distance:> 3m LED quantity: 20pcs (10pcs white + 10pcs warm white)/30pcs(white) Induction angle: 120 degrees LED life: more than 80,000 hours LED brightness: 350 lumens Light color: white light Working current: 120 mA (60 mA for white light) Working voltage: DC3.7V Battery full use times: more than 600 times Delay time: 15 seconds Operating temperature of lamp: -10 ~ 50 ℃ Shade Material: Aluminum + ABS Power and Plug Description: battery-powered Switch Installation: Type 3m sticker Note： 1. Do not install 2 lights too close to each other. Light may cause another does to not work. 2. This light can only be turned on in a dark environment. Packing list: 1 x Motion sensor closet light 1 x 3M tape 1 x USB cable 1 x User Manual