2p 63a Dual Power Automatic Transfer Switch For Generator Changeover Switch

Specification:Rated Frequency: 50/60HzElectrical Level: PC levelNumber of Poles: 2PRated Operating Current: 63ARated Operating Voltage: 220V ACCommon Problem:1. Will the electrical equipment be powered off during the switching process?The switching time of this dual power supply is about 30 mm, which can realize the uninterrupted switching of most electrical equipment (such as air conditioners, refrigerators, TVs, computers, monitoring, etc.).2. Can this product be installed in a distribution box?This product is small in size and can be installed in the power distribution device with the circuit breaker.3. Can this product be used with an inverter?Due to the characteristics of the product, this model cannot be connected to the inverter, but can only be connected to the mains or engine power (it is recommended to add an overvoltage and undervoltage protector to the generator).4. What is the power of the dual power supply load?220V single-phase electricity, 63A current can load 12KW.5. Can this product be powered off or switched off?This product is a two-stage dual power supply, with no opening position, that is, there is always one power supply connected to the load, so it cannot be opened and powered off.6. Does it have short circuit/overload protection?This product is a PC-level dual power supply, without short-circuit protection and overload protection.7. Which channel of the main and backup power supply will give priority to power supply?When the two circuits are powered at the same time, the main power supply will give priority to power supply. After the main power supply is cut off, it will automatically switch to the backup power supply. When the main power supply comes back on, it will automatically switch from the backup power supply to the main power supply.Package Includes:1 Pcs Dual Power Automatic Transfer Switch