-2C53P is a three-in-one dual-channel model launched by with comprehensive functions and high practicality, targeting people in the maintenance and industries. Word oscilloscope. This device has three major functions: oscilloscope, multimeter and signal generator. The oscilloscope adopts FPGA+MCU+ADC hardware architecture and has It has a sampling rate of 250MS/s, an analog bandwidth of 50Mhz, a built-in high-voltage protection module, and supports a maximum voltage measurement of 400V; supports waveform screenshots. Save and view to facilitate secondary analysis. The multimeter function is 4 and a half digits and 19999 points of true RMS, supporting AC and and current measurements, capacitance, resistance, With measuring functions such as diode, continuity, temperature, etc., it is an perfect multi-functional instrument whether used by , factories, schools, enthusiasts or families. Inside Set up a DDS function signal generator, which can output 12 kinds of function signals. The maximum output of the signal generator is 10MHz, with a step of 1Hz; output frequency, amplitude, and duty cycle Adjustable. It uses a 4.3-inch 480*272 resolution touch display and a built-in 4000mAh rechargeable lithium battery with a standby time of up to 4 hours. With small size Provide users with more and stronger practical functions, while also having good portability. Parameters: Screen size & resolution:4.3 Inch (480*272 pixels) Screen material: tempered glassSurface tempered glass + touch screen made of glass GLASS + IPS color screen BacklightBacklight brightness can be set Power supply:TYPE-C(5V/2A) Battery:4000mAh lithium battery Language: Chinese, English, French, German, Spanish, Portuguese, German, Portuguese Material: ABS colour: Black Package Contents: 1 x 2C53P 2CH Touchable Oscilloscope 2 x P6100 Probe 1 x Multimeter probe 1 x Alligator clip probe 1 x Data cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.