Feature: 1. Surge Protector: Connected in series to the front end of the protected equipment. When the transmission line is striked by inductive lightning and other transient over voltages, the surge current will be discharged to the ground through the protection branch of the surge protector, and the output voltage will be controlled to the allowable equipment voltage range, thus ensuring the safety of operating equipment. 2. Extensive Using: Can be widely applied to industrial control Internet, special line, automatic control and instrument lines and so on. 3. Safe Protection: Protecting equipment from damage caused by induced over voltages, operating over voltages, electrostatic discharges, etc. 4. Good Durability: Adopting flame retardant material with modular structure, this voltage arrester has great durability for long term use. 5. Easy to Install: Standard rail mounting enables the volt protector quick response, easy installation and convenient maintenance as well. Specification: Item Type: Surge Protective Device Model: SN TX 24 Rated Working Voltage Un: 24V Maximum Continuous Working Voltage Uc: 30V Nominal Discharge Current In: 5KA Maximum Discharge Current Imax: 10KA Protection Level Up: 60V Transmission Rate: 10M Insertion Loss: ≤0.3dB Features: It is used for the protection of industrial control Internet, RS422/485 interface, special line, automatic control and instrument lines, data lines, telephone equipment, fax machines and other equipment, and can also be used for the protection of sensors and secondary instruments in the current loop. Protecting equipment from damage caused by induced over voltage, operating over voltage, electrostatic discharge, etc.. Package List: 1 x Surge Protective Device