DMX512 wireless receiver receives standard DMX512 protocol data wirelessly from a console with reliable signal transmission and no delay. Operates in the 2.4G ISM frequency band. Features high-efficiency GFSK modulation and advanced communication design with 126 automatic frequency channels and strong anti-interference capabilities for stable performance. Supports 7 group ID codes, allowing up to 7 independent wireless networks to operate simultaneously in the same location without interference.LED indicators show status and ID settings: - ID 1: Red - ID 2: Green - ID 3: Yellow (Red + Green) - ID 4: Blue - ID 5: Magenta (Red + Blue) - ID 6: Cyan (Green + Blue) - ID 7: White (Red + Green + Blue) Operation: Press the ID setting button to configure. Working conditions: - LED constantly lit: No wireless signal detected - Red LED flashing: Transmitting data - Green LED flashing: Receiving data RF frequency range: 2400–2525 MHz, with 126 channels and automatic frequency search. Each device is assigned an ID code from 1 to 7. Only devices with the same ID code can communicate as sender and receiver. To set up communication: 1. Power on the wireless receiver first, then the transmitter. 2. Press the button on the receiver to match the transmitter's ID. 3. When IDs match, the green LED flashes rapidly, indicating successful connection. Use different ID codes when operating multiple systems simultaneously in the same area. The red LED flashes if the transmitter is not sending data or if the frequency is blocked. The receiver will automatically attempt to reconnect. The green LED flashes during synchronization; flash rate increases with data volume. Connection is established when both devices share the same ID and LED indication confirms communication. Color: As shown Package List: 1 x Wireless Receiver 1 x EU Adapter 1 x Specification Sheet (English) Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement tolerance: ±1–3 cm.