Condition: 100% Brand New <br>Item Type: OLED Display <br>Material: Plastic <br>Color: As the Picture Shown <br>Drive: SSD1309 <br>For SPI Interface Definition: <br>1. GND (power ground) <br>2. VCC (power positive) <br>3. SCL (clock line) <br>4. SDA (data line) <br>5. RES (reset line) <br>6.DC (data/command) <br>7.CS (chip selection) <br>Instruction: The seventh pin CS signal is led out by default; if you don’t need it, you can solder the R18 on, and the CS signal is directly grounded; this is very convenient for operation, adapting to the different needs of more customers, and meeting your needs is our goal <br>Interface Selection: Select for SPI or IIC interface through R15, R17, R13. <br>Application: Mainly industrial sites, military industry, geological exploration, petroleum and coal exploration and other industries.<br>1、In the absence of a backlight, the OLED display module can emit light by itself <br>2、Under low ambient light conditions such as dark rooms, OLED screens can achieve higher contrast than LCDs <br>3、Small size display is suitable for MP3, feature phone, smart health equipment, etc. <br>4、Small size, light weight, easy to install, with good performance, can bring you more convenience. <br>5、Made of high?quality plastic material, hard, wear?resistant, corrosion?resistant, and has long service life.This product defaults to SPI interface, R17 is soldered, R15/R13 is not soldered1 x <br> <br>OLED&nbsp;Display