Features:  The signal generator is an ultra-wideband phase-locked loop (PLL), with iegrated voltage controlled oscillator (VCO), capable of working in integer-N and fractional-N modes.  With an external reference clock oscillator and loop filter, the signal generator can form a high-performance frequency synthesizer capable of synthesizing frequency ranges of 23.5MHz to 6000MHz, while maintaining superior phase noise and spurious specifications.  The internal multi-channel integrated VCO covering the ranges of 3000MHz to 6000MHz and the 1-128 output frequency divider are used to realize the clock output with an ultra-wide frequency ranges. Compatible with 1.8V control logic.  The characteristics of the RF signal source module are that the onboard default high-precision 25MHz 0.5ppm TCXO, the internal VCO base frequency output frequency ranges is 3~6GHz, and the base frequency is divided below 3GHz.  This RF signal source module is a full touching screen frequency input, the output frequency mode is point frequency, and sweeps frequency is optional.  The RF signal source adopts lead-free, 5mmx5mm, and the operating temperature ranges is extended to 40°C to 85°C.  This tool can be controlled by PC, output amplitude is -4~5dBm, 4-level touching screen control.    Specifications:  Material: Printed circuit board  Power: ±5V  Current: 0.2A  Module communication protocol: SPI  Output amplitude: - 4~5 dBm  Module output frequency ranges: 23.5 MHz~6000 MHz  Input/output channel: 1  Working temperature ranges: - 40~85℃  Power supplys interface: Type - C  Module output signal: Sinusoidal  input/output interface module: SMA  Item size: 90 * 63 * 15mm / 3.5 * 2.5 * 0.6in  Item weight: 60g / 2.1ounce  Package size: 130 * 84 * 45mm / 5.1 * 3.3 * 1.8in  Package weight: 105g / 3.7ounce    Packing list:  1 * Signal Generator  1 * Cable